Used Manfrotto MT055XPRO3 Aluminum Tripod with MHXPRO-3W 3-Way Pan/Tilt Head
- MT055XPRO3 Aluminum Tripod
- MHXPRO-3W Pan/Tilt Head with QR Plate
- Load Capacity: 17.6 lb
- Max Height: 72″
Out of stock
MT055XPRO3 Aluminum Tripod with a MHXPRO-3W 3-Way Pan/Tilt Head.Holding up to 17.6 lb, and with a maximum height of 72″, the tripod features a Quick Power Lock System that allows you to completely extend the legs with just one hand. Once set up you can use the MT055XPRO3’s rapid center column in standard vertical mode or swing it into horizontal position like a boom with Manfrotto’s 90° column feature. Enlarged tabs on the individual leg angle selectors allow you to get down low for macro work with the column in horizontal mode. And once you’re down there you can attach any of Manfrotto’s flexible or articulated arms to hold lights or reflectors via the Easy Link plug built into the tripod’s spider.
The MHXPRO-3W is a compact 3-way pan/tilt head with retractable handles that can be extended as needed. Two knobs control the friction for the front-to-back and side-to-side tilt, allowing you to fine tune the movements based on the weight of your gear. A 200PL quick-release plate is included with the head.
Manfrotto MT055XPRO3 Aluminum Tripod
The Manfrotto MT055XPRO3 Aluminum Tripod is a three-section support that replaces the 055XPROB tripod. It has a load capacity of 19.8 lb and extends from 3.5″ to 66.9″. Its legs are secured by the Quick Power Locks. These updated flip locks increase the tripod’s rigidity by 50%, and its load capacity by 4.4 lb over its predecessor.
A redesigned center column has a “one finger” operation, and includes an Easy Link attachment for attaching accessories such as an LED light or a reflector. The center column can be positioned horizontally, allowing for low-angle and macro photography. The upper disc where a tripod head is mounted has been redesigned as well, and now has a bull’s eye bubble level that rotates 360° so you can locate it where you can see it. This allows you to level your camera on both the horizontal and vertical planes.Manfrotto MHXPRO-3W 3-Way Pan/Tilt Head
The MHXPRO-3W 3-Way Pan/Tilt Head from Manfrotto is a compact pan/tilt head with retractable handles that can be extended as needed. Two knobs control the friction for the front-to-back and side-to-side tilt, allowing you to fine tune the movements based on the weight of your gear. Three leveling bubbles ensure your composition is level on all axes. A 200PL quick-release plate with a 1/4″-20 camera mounting screw is included.
“like new minus” – the rating of the equipment is at 97 to 99 percent of original condition. only the closest inspections will reveal slight wear. perfect glass, but the box and accessories are usually not included.